AboutContactCareers
14.6 Kw, Crane Duty Slipring Motors , 3 phase, 6 Pole, 415 V, S5 Duty, KS225SB Frame, 40 CDF, 600 Start/Hr., TEFC
Resource Center
Image differs from product

14.6 Kw, Crane Duty Slipring Motors , 3 phase, 6 Pole, 415 V, S5 Duty, KS225SB Frame, 40 CDF, 600 Start/Hr., TEFC - KS14P622J40X35XSX

Part#: KS14P622J40X35XSX

Catalog#: AL08D4730MFAFTOAOO

Weight: 390 lb

location_on Where to Buy

Key Features

  • Metric Dimensions IEC:60072-1 & IS:1249
  • Totally enclosed fan cooled with IP-55 degree of protection
  • High ratio of pullout full load torque
  • Ratings up to approximately 450 kW
  • larger outputs available for certain specific requirements
  • Supply voltages up to 660 volts
  • Insulation class F/F (stator/rotor) with temperature rise limited to Class B/B stator/rotor)

Specifications

Phase Phase: 3 Output HP Output HP: 19.60 Hp
Output KW Output KW: 14.6 kW Voltage Voltage: 415 V
Speed Speed: 981 rpm Frame Frame: KS225SB
Thermal Protection Thermal Protection: No Protection Ambient Temperature Ambient Temperature: 45 °C
Frequency Frequency: 50 Hz Current Current: 34 A
Duty Duty: S5 Drive End Bearing Size Drive End Bearing Size: 6314
Opp Drive End Bearing Size Opp Drive End Bearing Size: 6314 Enclosure Enclosure: Totally Enclosed Fan Cooled
UL UL: No CSA CSA: No
CE CE: No IP Code IP Code: 55
CDF CDF: 40 % Start/Hr Start/Hr: 600
RA RA: 32 A RV RV: 280 V
Insulation class Stator/Rotor Insulation class Stator/Rotor: F/F Temp. Rise Stator/Rotor Temp. Rise Stator/Rotor: 75/75 K
Stator Connection Stator Connection: Delta Rotor Connection Rotor Connection: Star
Efficiency Class Efficiency Class: Standard
Electrical Type Electrical Type: Slipring Starting Method Starting Method: Rotor resistance starter
Rotation Rotation: Bi-Directional Mounting Mounting: IMB3
Motor Orientation Motor Orientation: Horizontal Drive End Bearing Drive End Bearing: Antifriction
Opp Drive End Bearing Opp Drive End Bearing: Antifriction Frame Material Frame Material: Cast Iron/Fabricated
Shaft Type Shaft Type: Single Cylinder Overall Length Overall Length: 1053 mm
Frame Length Frame Length: 1053 mm Shaft Diameter Shaft Diameter: 60 mm
Shaft Extension Shaft Extension: 140 mm Assembly/Box Mounting Assembly/Box Mounting: Top
Rotor GD2 Rotor GD2: 3.4 kg·m² Pull Out Torque Pull Out Torque: 4.4
Output HP Output HP: 19.60 Hp Output KW Output KW: 14.6 kW
Frame Size Frame Size: 225 Frame Suffix Frame Suffix: SB
Frequency Frequency: 50 Hz Voltage Voltage: 415 V
Current Current: 34 A Speed Speed: 981 rpm
Connection Drawing Connection Drawing: DP2513 Outline Drawing Outline Drawing: CM19820.00
Frame Prefix Frame Prefix: KS Packaged Length Packaged Length: 1320.80 MM
Weight Weight: 390 Packaged Width Packaged Width: 838.20 MM
Packaged Height Packaged Height: 838.20 MM

Efficiency

Information not available at the moment. Please check back later!